JARCH Long life drive spring Driven 50-Feet Hose Reel for Air/Water
Product Description
JARCH's Series 7000 is very robust and ideal for the most demanding applications. The reel’s base and guide arm are formed from high-grade steel and engineered with structural forms and gussets to yield the greatest amount of strength. The basic reel without hose can be used for air, water or oil. Consult Reelcraft for other products and hoses. Guide arm adjusts to 7 positions.
Product Specifications
| Part Number | 7850 OMP |
| Series | 7000 |
| Weight (lbs) | 57 |
| Hose I.D. (in) | 1/2" |
| Hose O.D. (in) | .820 |
| Hose Length (ft) | 50 |
| Pressure (psi) | 3000 |
| Hose End (in) | 1/2 NPT(M) |
| Inlet (in) | 1/2 NPT(F) |
| Reel Outlet (in) | 1/2 NPT(F) |
| Hose Included | Yes |
| Max Temperature (°F) | 210 |
Fluid Path Materials |
| Seal Type | Aflas | | Swivel Material | Steel |
|
Benefits
Swivel
Machined from solid brass 90◦ full-flow NPT swivel for simple seal maintenance and fast and easy hose installation. No need to remove the reel from its mount.
Swivel Seals: Nitrile.
CNC Spun Discs
Heavy duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection and operator safety.
1/4" Steel Base
Sturdy single pedestal design with solid one piece steel base and support post, no weld, for maximum stability. Equipped with JARCH exclusive super hub dual axle support.
Multi-Position Guide Arm
Versatile guide arm adjusts to wall, floor, ceiling, and vehicle mounting positions.
Hose Stop
Adjustable solid rubber hose stop for lead length positioning, and long lasting, chip resistant and rust inhibiting CPC powder coat finish.
Base Assembly
1" Solid steel axle and lubricated precision bearings for smooth rotation. Non-corrosive stainless steel spring, pawl, and zinc plated ratchet.
***Reinforced steel - -The steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight.
***Full flow stress free swivel design - -The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.
***Long life drive spring - -Declutching arbor virtually eliminates possibility of spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life.
***Quality finish and corrosion resistant - -Individually powder coated components offer the maximum protection from premature corrosion.
JARCH Carbon Steel Hotel Kitchen Washing Return Water Automatic Red Hose Reels wall mount
Application
JARCH Carbon Steel Hotel Kitchen Washing Return Water Automatic Red Hose Reels wall mount
1.What technical data should be provided for our customized slip ring,Rotary Joint,Hose reel model.
A:
If you want to costomize the special slip ring model, you need provide details as below:
a. Operatring speed(RPM)
b. The type of installation
c. Outline size
d. Channels(the No. of single wire besides cable)
e. Rated voltage & current for power rings and signal rings
f. The signal type and related parameters(very important)
g. Operating temperature h.IP(sealing requirements)
2.How long is your production lead time?
A: It needs 7 to 15 days for standard products, 10 to 20 days for simple customized products,
15 to 40 days for complex customized porducts.
3.How do I increase or reduce spring tension?
To increase spring tension:
Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly* until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity.
To reduce spring tension:
This can be accomplished by removing wraps of hose from the reel sheave. Remove wraps of hose from the sheave, one wrap at a time, until desired tension is obtained.
*For Series D9000 reels, you will have to remove the bumper and control handle then feed end of hose through roller bracket assembly to add or remove wraps of hose from the reel drum.
Contact Us
If you have any questions, pls contact us without any hesitation.
Product Tags:
|
|
50 Feet Retractable Hose Reel Long Life Drive Spring Driven For Air / Water Images
|
